My small lamp shorted and I changed it a few days ago. I only use it at night when I read a book or check SNS in bed. A few days later, I noticed the lamp’s switch was broken. Firstly I thought the line was cut, but it was not. It’s just had a loose screw. So I used a screwdriver and I fixed it. I remember when I was a junior high school student I did a simple dry battery experiment. In the experiment, we used the red and blue color-coded wires and connected them to battery’s terminals. The experiment was very simple. Electricity flows from the terminal to the wires. We learned to figure out the color codes of the wire and which turned it on or off. My lamp’s circuit is really simple. At first glance it really looks complicated, but it really isn’t.
========
BEFORE CORRECTION
========
Title:My room’s small lamp’s bulb was shorted
My room’s small lamp’s bulb was shorted and I changed it these days ago. It’s used at night only my bedside when I read a book or check SNS in the bed. Another day I noticed the lamp’s switch was broken. Firstly I thought the line was a cutter, but it was not. It’s just loose the screw. So I used the screwdriver and I fixed my room lamp. I remember when I was a junior high school student I did a simple dry battery’s experiment. It used the red and blue code and connect to battery’s both side. And I try to put on or off the code on the battery, so I could understand the light on or off. The electronic flow in the line. The system is really simple. Firstly thinking the things looks complicated but it’s not so almost.
